Photo by Rick Gush
I’ve got several projects going at the moment: building a pair of Adirondack chairs, starting spring garden work and prepping my next art project. All of these activities require excessive and repeated tool use. One of my favorite things about the garden is getting to use a bunch of different tools, and it’s the same with my shop. The fact that I can actually make things is part of my pleasure, but it’s the use of the tools that gets me most excited.
In the workshop, I’m cutting out all the pieces for the Adirondack chairs. Each chair has 40 individual pieces, so I’ve been doing a lot of cutting and shaping. In order to have a pair of chairs match exactly, I have to make sure that all the pieces are the same for both chairs. I try to be as careful as I can, but it’s inevitable that when cutting the curved pieces there are some differences.
To make the pieces exactly alike, I screw them together into one block and use a wood shaper to carve down the differences until all the pieces match. The tool I used a lot today was a curved surform. It has a thin steel blade that looks like a cheese grater held in a plastic or metal handle. The tool works very nicely when a board needs to be modified slightly. I’ve used a flat surform a lot, but his is my first curved surform and I’m quite taken with it. Eleven euros very well spent!
As for my garden work, today I pulled up some of the older broccoli plants and started preparing the bed for planting tomatoes and squash next week. The old broccoli plants have big, thick stems, so in order to compost all the refuse, I needed to cut all the old broccoli stalks into short pieces. It took me about 45 minutes to clear the plot of all the old plants and weeds and chop all that up into small pieces. Having a nice pair of pruning shears with an extra large mouth made the work much easier, and I certainly enjoyed having the perfect sharp shears to get the job done.